top of page

Wallpaper Terminology: 50 Terms Every Homeowner Should Know

Writer: Rebirth Paperhanging Team
Rebirth Paperhanging Team
Oct 27
9 min read

Wallpaper has its own vocabulary, and a few terms change how much you buy, how it's hung, and how hard it is to remove. The ones that matter most are pattern repeat and match type (they drive how much paper you need), dye lot (it protects color consistency), booking and paste the wall (they describe how paper is hung), and strippable vs. peelable (they decide how easily it comes off later). All 50 terms are explained below in plain English.



When you start shopping for wallpaper or talking to an installer, the language can feel like a code: drop match, dye lot, double cut, booking. These aren't jargon for its own sake. Each term describes something that affects your cost, your timeline, or your result. This glossary explains them the way an installer would explain them across a kitchen table, grouped by the stage of the project where you'll run into them.


A note on definitions : manufacturers don't always use terms the same way, especially "strippable" and "peelable." When in doubt, check the label or sample book for your specific product.


Part 1: Wallpaper Materials and Types


1. Non-woven wallpaper

A wallpaper made from a blend of natural and synthetic fibers rather than a solid paper sheet. It's breathable, tear-resistant, and holds its shape when wet, which makes it easier to hang and often easier to remove. It's commonly hung by pasting the wall instead of the paper.


2. Vinyl wallpaper

Wallpaper with a plastic (vinyl) surface layer, usually over a paper or fabric backing. The surface resists moisture and wipes clean, so it's common in kitchens, baths, and hallways.


3. Solid vinyl

Wallpaper whose decorative surface is a solid sheet of vinyl, rather than a thin coating. It's among the most durable residential and commercial options and is usually scrubbable.


4. Vinyl-coated paper

Paper with a thin protective coating on the surface. It offers some moisture and stain resistance, but it's less durable than solid vinyl. It's often a good fit for powder rooms and other lower-moisture spaces.


5. Traditional paper

Plain, uncoated or lightly coated paper wallpaper. It can be beautiful and is often used for classic patterns, but it's the most delicate option and the least forgiving in humid or hightraffic rooms.


6. Grasscloth

A natural-fiber wallcovering made of woven or laid grasses and fibers on a paper backing. Natural color and texture variation, including visible seams, is part of its look. It's delicate, doesn't tolerate moisture, and shows wall flaws, so it suits bedrooms, dining rooms, and offices. See our grasscloth wallcovering work for where it performs best.


7. Peel-and-stick

Self-adhesive wallpaper with a sticky backing that you press onto the wall. It's easy to try and easy to remove, which makes it popular for rentals, but it typically doesn't last as long as paste-applied wallpaper. It's different from "peelable," which is a removal term (see #45 ).


8. Mural

A wallcovering designed as one large image or scene rather than a repeating pattern, usually sold in panels. Murals are the least forgiving to install because alignment errors show across the whole image. They're a popular feature-wall choice, and we install them as part of our accent wall work.


9. Embossed

Wallpaper with a raised, three-dimensional texture pressed into the surface. Embossed papers add depth and can hide minor wall imperfections better than smooth, flat prints.


10. Metallic (foil or mica)

Wallpaper with a reflective foil or mica-flecked surface that catches light. It's dramatic in dining rooms and powder rooms, but it shows seams and wall imperfections more than matte finishes do. Designer metallics are covered in our luxury wallcovering guide.


Part 2: Patterns and Matching


11. Pattern repeat

The vertical distance before a pattern begins again. A small repeat wastes little paper, while a large repeat (some run 24 inches or more) means more trimming and more rolls. It's one of the biggest factors in how much wallpaper you order.


12. Straight match (straight-across match)

A pattern that lines up horizontally across strips at the same height, so the design sits level from one strip to the next. Stripes are the classic example. It's easier to plan than a drop match.


13. Drop match

A pattern where each strip is shifted vertically so the design continues diagonally across the wall. It can look more dynamic, but it takes more planning and usually more paper.


14. Half-drop match

A type of drop match where the pattern is offset by half the repeat, so every other strip lines up at the ceiling line. Half-drop patterns generally create more waste than straight matches.


15. Random match (free match)

A pattern or texture that doesn't need to line up from strip to strip. It's the easiest to hang and the most forgiving with waste, which is why many textures and grasscloth-look papers use it.


16. Multiple drop match

A more complex match where it takes four or more strips before the vertical design repeats at the ceiling line. It can look stunning, but it isn't a good first wallpapering project.


17. Directional pattern

A design with an obvious top and bottom that can't be hung upside down, such as a tree or a repeating figure. Directional patterns need careful handling when strips are cut and numbered.


18. Scale

How large the motifs in a pattern are relative to the wall and room. Large-scale prints can feel bold and dramatic, while small-scale prints read as texture. Scale affects both the look of a room and how much paper you'll need.


19. Pattern match

The way a design aligns where strips meet at the seams. The match type (straight, drop, random) tells the installer how to plan every cut.


Part 3: Ordering and Labels


20. Single roll

The standard unit most wallpaper is priced by. A single roll holds roughly half the paper of a double roll. Because wallpaper is usually manufactured in double rolls, you'll typically need to order an even number of singles.


21. Double roll

Two single rolls' worth of paper on one roll. A common US double roll is about 20.5 inches wide by 33 feet long (roughly 56 square feet), but 27-inch widths and other sizes exist. Always check the spec sheet. For a full method, see our guide to calculating how many rolls you need.


22. Bolt

The manufacturer's packaged unit of wallcovering, which can be a single roll, a double roll, or a set length, particularly in commercial and designer lines. The label tells you exactly what's in it.


23. Dye lot (run number, batch number)

A number printed on each roll that identifies the production run it came from. Rolls from the same dye lot match in color, while a different lot can show a slight difference. Always check that every roll shares the same number before anything is cut.


24. Pattern number

The manufacturer's code for a specific design and colorway. Record it, along with the dye lot, in case you need to reorder.


25. Overage

Extra wallpaper ordered beyond the calculated amount, to cover pattern matching, mistakes, and future repairs. It's usually at least one spare roll.


26. Selvedge

A narrow unprinted strip along the edges of some "untrimmed" wallpaper that must be cut off before hanging.


27. Pre-trimmed

Wallpaper with the selvedge already removed at the factory, so it's ready to hang

edge to edge.



Part 4: Adhesives and Wall Preparation


28. Pre-pasted

Wallpaper with adhesive already applied to the back, activated by water. It's convenient, though some professionals still prefer to apply their own adhesive for a stronger bond, depending on the material.


29. Paste the wall (dry hanging)

A method where adhesive is rolled onto the wall and dry wallpaper is hung into it. It's cleaner, avoids paste on the front of the paper, and is typical for non-woven wallpaper.


30. Paste the paper

The traditional method of applying paste to the back of the wallpaper, then folding it to rest before hanging.


31. Clay-based adhesive

A thick, heavy-duty paste used for heavier or textured wallcoverings and many commercial installations. It grips well and gives installers a little more working time.


32. Booking

Folding a pasted strip back on itself, paste to paste, and letting it rest for several minutes before hanging. It lets the paper relax and expand, so seams sit flat and don't shrink or gap afterward. Follow the manufacturer's instructions for timing.


33. Wallpaper primer (sizing)

A sealing coat applied to the wall before wallpaper. It creates a uniform surface for adhesive to grip and makes the wallpaper much easier to remove later.


34. Lining paper

A plain paper hung under the decorative wallpaper to smooth out minor wall flaws and create a better surface. It's sometimes used on older or irregular walls.


35. Skim coat

A thin layer of joint compound spread over a wall to smooth it. It's the standard fix for textured walls and rough plaster before wallpaper. See our plaster wall prep guide for when it matters.


36. Orange peel and knockdown texture

Two common sprayed wall textures. Orange peel is a fine bumpy surface, and knockdown is a flattened, more irregular version. Both are common on builder-grade walls across North Texas and can show through smooth wallpaper if they aren't smoothed first. See our guide to wallpapering new construction homes.


Part 5:Installation Terms


37. Strip (drop)

A single length of wallpaper cut to cover one vertical section of wall, from ceiling to baseboard plus trim allowance. Installers plan the whole room by counting strips.


38. Plumb line

A true vertical guide line, drawn with a level or plumb bob, that the first strip is aligned to. Walls and corners are rarely perfectly straight, so installers don't trust the corner.


39. Double cut

A seam technique where two strips are overlapped and cut through both layers at once, then the scraps are removed so the edges butt together tightly. It's widely used on heavier materials and for seams that need to be nearly invisible.


40. Butt seam

A seam where two strips meet edge to edge with no overlap. It's the standard seam for most wallpaper.


41. Seam roller

A small roller used to press seams flat. It's used on many materials but not on delicate or textured ones like grasscloth, where pressure can leave marks.


42. Smoothing brush

A wide, soft tool used to press wallpaper against the wall and work out air bubbles from the center outward.


43. Trim cut

The final cut at the ceiling and baseboard, made with a sharp blade against a straightedge to remove the excess paper and leave a clean edge.


Part 6: Removal and Care


44. Strippable

Wallpaper that can be pulled off the wall in full strips without leaving backing behind. Usually described as "dry strippable." It's the easiest type to remove.


45. Peelable

Wallpaper where the top layer pulls off but a backing layer stays on the wall, which then needs to be removed or sealed. Note that some brands use "peelable" differently, so check the label.


46. Wet strippable

Wallpaper that comes off after being dampened with water or a removal solution. See our wallpaper removal service and our removal guide for how it's done safely.


47. Washable

Wallpaper that can be wiped with a damp sponge. It's less durable than scrubbable.


48. Scrubbable

Wallpaper durable enough to be scrubbed with a sponge and mild soap. It's a higher durability level than washable, and it's the category to look for in kitchens, hallways, and kids' rooms.


Part 7: Commercial Wallcovering Terms


49. Type II

A medium-duty commercial durability class, the most widely specified for corridors, lobbies, restaurants, and clinics. It's heavier and more abrasion-resistant than Type I. Our commercial wallpaper installation work covers where each grade fits, and our commercial guide goes deeper.


50. Class A rating

The highest flame-spread rating under the ASTM E84 test. Most commercial vinyl wallcoverings carry it, and fire marshals often ask for documentation. Requirements depend on your building and occupancy, so confirm with your architect or fire marshal.


How to Use This Glossary When You Talk to an Installer


A few of these terms will come up in almost every conversation, and knowing them helps you ask better questions and compare quotes fairly:


  • Ask what the match type and pattern repeat are, because they decide how much to order.

  • Confirm that every roll shares the same dye lot before anything is cut.

  • Ask whether your wallpaper is paste the wall or paste the paper, and who's applying it.

  • Check whether the wallpaper is strippable or peelable, so you know what removal will look like later.

  • Ask what wall prep (primer, skim coat) your walls need, especially if you have textured or plaster walls.


If you'd like help interpreting a label, a sample book, or a quote, contact us with a photo. We work with homeowners across Dallas, Fort Worth, and North Texas, and it's much easier to sort out terminology before you order than after.


About the Author


This guide was written by the Rebirth Paperhanging content team in direct consultation with Brent Yost, founder of Rebirth Paperhanging. Brent is an architect-trained, registered interior designer with 25+ years of experience installing wallcoverings across Dallas-Fort Worth. Learn more about Brent's background and credentials.


Frequently Asked Questions


What is the difference between strippable and peelable wallpaper?

Strippable wallpaper pulls off the wall in full strips, while peelable wallpaper releases its top layer and leaves a backing on the wall. Definitions vary slightly by manufacturer, so check the label.


What does drop match mean in wallpaper?

It means each strip is shifted vertically so the pattern continues diagonally across the wall. Drop and half-drop matches generally need more planning and more paper than a straight match.


What is a dye lot, and why does it matter?

A dye lot identifies the production run a roll came from. Rolls from different runs can differ slightly in color, so every roll for a room should share the same number.


What does booking wallpaper mean?

It means folding a pasted strip back on itself and letting it rest for several minutes before hanging, so the paper relaxes and seams stay flat.


What's the difference between a single roll and a double roll?

A double roll is twice as long as a single. Most US wallpaper is priced per single roll but shipped as doubles, so you typically order in even numbers.


What does pattern repeat mean?

It's the vertical distance before a design starts over. Larger repeats mean more waste and more rolls.


What is double cut in wallpaper installation?

It's a seam technique where two overlapping strips are cut through both layers at once and the scraps removed, producing a tight, nearly invisible seam.











 
 
 

Comments


bottom of page